| Dongguan Geli Tool Co.,Ltd 当前位置： 首页 >>News >>Technical information |
| Operation instructions of dual power manual soldering gun |
| Operation instructions of dual power manual soldering gun
Performance characteristic:
1. The soldering tin rifle adopts the light and handy organization to design; it is more relaxed to work.
2. 45W/65W power two interchangeable, and materials used in different temperature requirements of the welding, one of dual-use, cost savings.
3. Generate heat core while being high-quality, have longer working lives.
4. It is simple to operate. It is apt to finish welding the homework.
5. Amount uses the diameter as the tin thread of 0.8.3mm.
6. Use voltage of 110 VAC or 220 VAC
Operation method:
1. First-time welding torch in hand, the warm-up to be a few minutes, there will be smoke gas, is a normal phenomenon will disappear in a few seconds.
2. Insert the specified tin mouth from entering of tin line, then pull the trigger according to the arrow point direction, can work normally until the tin silk sends and leads the tin to manage the mouth to stop.
3. While needing to withdraw from or change the tin silk while stopping using, so long as extremely stiff the direction will be promoted upwards, will take out the tin silk at the same time.
4. At is it generate heat core to changing, is it pull down to stamp protecting first, is it generate heat core line to disassemble, pull down flatiron chew, can is it generate heat the core to change again.
Precautions:
1. While working, the temperature that the flatiron is chewed and the flatiron is in charge of is up to more than 400 degrees, forbid the human body to touch so as not to burn.
2. When the hand welding torch stops using, please put it on its support.
3. Work after finishing, close power, etc. is it put to keep after the complete cooling. |
| 文章来源：http://www.juchetrade.com/te_news_industry/2009-05-30/561.chtml |